Gebirgsjäger painting guide

Bryan Cook lends us his painting skills and knowledge to show us how to paint the Gebirgsjäger!

I really enjoyed painting up this squad box of German mountain troops, so made sure to record my process to create a painting guide for them. These models are great sculpts that are easy to paint and are full of character. What follows is a step by step guide on how I painted mine, broken down into easy to replicate stages. I worked on all 10 models at once in a batch painting process.

Step 1 – Coloured spray primer

Begin by priming your models with Army Painter Skeleton Bone spray. This will lay down the undercoat and a good neutral base colour in one easy step. Normally with other types of German troops I would use a darker undercoat but the Gebirgsjäger have a lot of lighter coloured clothing mixed in so it’s easier to get a better paint coverage with this lighter basecoat.

Step 2 – Base colours

Next step is to lay down all the lighter base colours. These are done first so any mistakes made can be painted over with the darker base colours, which is the next step, this saves time on cleaning up any errant brushstrokes.

1. Skin: GW Cadian Fleshtone
2. Boots: GW Rhinox Hide
3. Rifle stock & water bottle flask: VJ Flat Brown
4. Khaki Anorak: VJ Khaki Grey
5. Rucksack & SMG ammo pouches: VJ German Camo Beige
5. Rucksack straps: VJ Flat Brown

Step 3 – More Base colours

Now the darker of the basic colours are applied. These darker colours may need two coats of paint to give a solid coverage over the light primer. Make sure you thin down your paint slightly when doing these two coats.

1. Trousers, cap and wind parka: VJ German Field Grey WWII
2. Gaiters, socks, gloves, gas mask canisters: VJ Black Green
3. Webbing: GW Abaddon Black
4. Gun barrels, water bottle lid & mess tin: GW Leadbelcher

Step 4 – Washes

Now it’s time to begin adding some depth, first up will be creating darker shades in the shadow areas using acrylic washes. Simply apply the washes listed below using an older brush that’s medium to large in size, watering down the wash slightly as you apply them.

1. Skin: GW ReiklandFlesh
2. Khaki Anorak: GW Seraphim Sepia
3. Everything else: AP Strong Tone
4. Gun barrels: GW Nuln Oil wash

Step 5 – Highlights

After the previous step added darkness to the shadows it’s now time to bring the lighter shades by carefully painting on highlights to the raised areas of the model. You’ll definitely need a fine detail brush for this, I, for example, used a 00 size from Windsor & Newton. When you water down these colours use an older brush to do so, don’t wreck your fine detail brush with this task. Most areas were highlighted with two successive highlights.

1. Skin: GW Kislev Flesh then GW Flayed One Flesh
2. Boots: GW Rhinox Hide
3. Rifle stock: GW Doombull Brown then VJ Orange Brown
4. Khaki Anorak: Mix of 50/50 VJ Khaki Grey and VJ Iraqi Sand
5. Rucksack & SMG ammo pouches: Mix of 50/50 VJ German Camo Beige and white
6. Rucksack straps & water bottle flask: GW Doombull Brown then GW Tuskgor Fur
7. Trousers, cap and wind parka: See Field Grey box out below
8. Gaiters, socks, gloves, gas mask canisters: VJ German Uniform
9. Webbing: VJ German Grey
10. Insignia (cap eagle and edelweiss badge): VJ Stone Grey

Field Grey step by step

Here’s one way to paint the distinctive German uniform colour of WW2;

Stages of painting field grey

1. Basecoat & wash: VJ German Field Grey WWII then AP Strong Tone wash
2. Highlight 1: VJ German Field Grey WWII
3. Highlight 2: VJ Green Grey
4. Wash/glaze: Secret Weapon Storm Cloud Blue wash

A finished model with some of the paints used

Step 6 – The bases

With the mini painted lets now look at the bases. You can, of course, do these in any way that suits your tastes. I have chosen a medium earth base and some grey granite rocks as I intend for my Gebirgsjäger to be fighting in autumn in the Carpathian mountains, so not high alpine or full winter, so no snow.

1. Earth: VJ Flat Earth then drybrush with VJ Iraqi Sand
2. Rocks: GW Eshin Grey then drybrush with VJ Stone Grey
3. Base trim: GW Rhinox Hide

Step 7 – Matt varnish and basing material

With the entire model painted you should now consider varnishing to protect your models from the hazards of tabletop gaming and grubby fingers. I used a matt varnish spray, Testors Dullcoate. The last touch is to add some flock and other basing material to really set the scene. I used grass tufts from a Gamers Grass, dark green clump foliage from a model railway store and birch tree seeds for the fallen leaves, to give that Autumn look.

Here is the finished squad plus a few close-ups on these great miniatures. The badge there is the actual edelweiss cap badge the Gebirgsjäger wore.

More Germans!

View in Store


View in Store